Subaru IMPREZA GD 2007 Series Manual page 2980

asieps_tobira_IM_US.book 75 ページ ２０１２年１月１７日 火曜日 午後３時４８分
8) Install the 4th baulk ring.
9) Apply adequate gear oil to the main shaft, 4th
needle bearing and 4th drive gear inner surface.
10) Install the 4th needle bearing and 4th drive
gear.
(B)
(A) 4th needle bearing
(B) 4th drive gear
Main Shaft Assembly
11) Install the 5th bushing.
(1) Being careful not to cover the oil holes of the
main shaft and 5th bushing, attach to the main
shaft.
MT-00564
(A)
MT-00565
(2) Using the ST, push into the 5th bushing.
ST1 18651AA000 INSTALLER
ST2 398177700
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
12) Make sure that the 4th drive gear can be turned
smoothly by hand. If it does not turn smoothly, re-
assemble.
13) Apply adequate gear oil to the main shaft, 5th
needle bearing and 5th drive gear inner surface.
6MT-75
MANUAL TRANSMISSION AND DIFFERENTIAL
(A)
(D)
(C)
A
(B)
(C)
(A)
(B)
(C)
A - A
(A) 5th bushing
(B) Main shaft oil hole
(C) Main shaft
(D) 5th bushing oil hole
(E) 4th drive gear
INSTALLER
ST1
A
(E)
MT-00566
ST2
MT-00567