Subaru IMPREZA GD 2007 Series Manual page 3229

asieps_tobira_IM_US.book 20 ページ ２０１２年１月１７日 火曜日 午後３時４８分
BRAKE
C: INSPECTION
1. 15-INCH TYPE
Check the pad thickness A.
A
Standard
Pad thickness
Wear limit
NOTE:
• Always replace the pads of both sides as a set.
• Replace pad clips if they are twisted or worn.
• A wear indicator is installed on the inner disc
brake pad. If the pad is worn to the limit, the end of
wear indicator contacts disc rotor, and a squeaking
sound is heard as the wheel rotates. If the sound is
heard, replace the pad.
• Replace the pad if there is oil or grease on it.
2. 16-INCH TYPE
Check the pad thickness A.
Standard
Pad thickness
Wear limit
NOTE:
• Always replace the pads of both sides as a set.
• Replace pad clips if they are twisted or worn.
• A wear indicator is installed on the inner disc
brake pad. If the pad is worn to the limit, the end of
wear indicator contacts disc rotor, and a squeaking
sound is heard as the wheel rotates. If the sound is
heard, replace the pad.
• Replace the pad if there is oil or grease on it.
Front Brake Pad
BR-00482
11 mm (0.43 in)
1.5 mm (0.059 in)
A
BR-00296
10 mm (0.393 in)
1.5 mm (0.059 in)
BR-20
3. 17-INCH TYPE
Check the pad thickness A.
A
Standard
Pad thickness
Wear limit
NOTE:
• Always replace the pads of both sides as a set.
• Replace pad clips if they are twisted or worn.
• A wear indicator is installed on the inner disc
brake pad. If the pad is worn to the limit, the end of
wear indicator contacts disc rotor, and a squeaking
sound is heard as the wheel rotates. If the sound is
heard, replace the pad.
• Replace the pad if there is oil or grease on it.
BR-00296
9.2 mm (0.362 in)
1.2 mm (0.047 in)