Subaru IMPREZA GD 2007 Series Manual page 3459

asieps_tobira_IM_US.book 53 ページ ２０１２年１月１７日 火曜日 午後３時４８分
• Turbo model
(1)
(1) Bolt A
(2) Pipe C
(3) Pipe D
(1) Connect pipe D to the oil tank.
(2) Install the pipe C to the oil pump using a new
gasket.
Tightening torque:
40 N·m (4.1 kgf-m, 29.5 ft-lb)
(3) Tighten the two bolts (bolts A) fixing pipe C
and D in place.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
2) Install the coolant filler tank. (Turbo model)
Tightening torque:
T1: 16 N·m (1.6 kgf-m, 11.8 ft-lb)
T2: 13 N·m (1.3 kgf-m, 9.4 ft-lb)
Pipe Assembly
POWER ASSISTED SYSTEM (POWER STEERING)
3) Temporarily connect the pipes C and D to the
gearbox.
(2)
(3)
PS-00433
4) Temporarily tighten clamp E on pipes C and D.
NOTE:
Make sure that the character 8 on each clamp is
positioned on the opposite side, as shown in the
T1
figure.
T2
CO-02171
5) Tighten clamp E.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
PS-53
(1)
(3)
(6)
(4)
(5)
(7)
(1) Return hose
(2) Pressure hose
(3) Approx. 30 mm (1.18 in)
(4) Clamp E
(5) Pipe C
(6) Pipe D
(7) Pipe (gearbox side)
(1)
(1) Clamp E
(2) Pipe C
(2)
PS-00178
(2)
PS-00196