Subaru IMPREZA GD 2007 Series Manual page 2550

asieps_tobira_IM_US.book 43 ページ ２０１２年１月１７日 火曜日 午後３時４８分
10. Transmission Mounting System
A: REMOVAL
1. PITCHING STOPPER
1) Disconnect the ground cable from the battery.
2) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H4SO)-6, REMOVAL, Air Intake
Chamber.>
3) Remove the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-13, REMOVAL, Intercooler.>
4) Remove the throttle body. <Ref. to FU(H4SO)-
12, REMOVAL, Throttle
FU(H4DOTC)-16, REMOVAL, Throttle Body.>
5) Remove the pitching stopper.
2. TRANSMISSION REAR CROSSMEMBER
& REAR CUSHION RUBBER
1) Disconnect the ground cable from the battery.
2) Jack-up the vehicle and support it with rigid
racks.
3) Remove the front, center and rear exhaust pipes
and the muffler. (Non-turbo model) <Ref. to
EX(H4SO)-4, REMOVAL, Front Exhaust Pipe.>
<Ref. to EX(H4SO)-8, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-9, REMOVAL, Muffler.>
4) Remove the center and rear exhaust pipes and
the muffler. (Turbo model) <Ref. to EX(H4DOTC)-
10, REMOVAL, Center Exhaust Pipe.> <Ref. to
EX(H4DOTC)-15, REMOVAL,
Pipe.> <Ref. to EX(H4DOTC)-17, REMOVAL, Muf-
fler.>
5) Set the transmission jack under transmission.
Make sure that the support plate of transmission
jack does not touch the oil pan.
Transmission Mounting System
6) Remove the transmission rear crossmember.
Body.> <Ref. to 7) Remove the rear cushion rubber.
B: INSTALLATION
1. PITCHING STOPPER
1) Install the pitching stopper.
Tightening torque:
AT-00679
2) Install the throttle body. <Ref. to FU(H4SO)-12,
INSTALLATION,
FU(H4DOTC)-16,
Body.>
3) Install the air intake chamber. (Non-turbo model)
<Ref. to IN(H4SO)-6, INSTALLATION, Air Intake
Chamber.>
4) Remove the intercooler. (Turbo model) <Ref. to
Rear Exhaust
IN(H4DOTC)-14, INSTALLATION, Intercooler.>
2. TRANSMISSION REAR CROSSMEMBER
& REAR CUSHION RUBBER
1) Install the rear cushion rubber.
Tightening torque:
2) Install the crossmember.
4AT-43
AUTOMATIC TRANSMISSION
T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N·m (5.9 kgf-m, 43 ft-lb)
T2
Throttle Body.>
INSTALLATION,
39 N·m (4.0 kgf-m, 29 ft-lb)
AT-03697
T1
AT-00691
<Ref. to
Throttle