Subaru IMPREZA GD 2007 Series Manual page 3363

asieps_tobira_IM_US.book 39 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7. Rear Drive Shaft
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Lift up the vehicle, then remove the rear wheels.
3) Flatten the tab of the axle nut.
4) While applying the parking brake, remove the
axle nut using a socket wrench.
CAUTION:
Remove the axle nut while there is no load be-
ing applied to the axle.
5) Remove the rear stabilizer link.
• Except for STI model
• STI model
Rear Drive Shaft
6) Remove the bolts which secure the trailing link to
the housing.
7) Remove the bolts which secure the front and
rear lateral link to the housing.
DS-00038
8) Remove the rear ABS wheel speed sensor from
the back plate.
RS-00100
(1) ABS wheel speed sensor
RS-00163
DS-39
DRIVE SHAFT SYSTEM
DS-00066
DS-00067
( 1 )
DS-00069