Subaru IMPREZA GD 2007 Series Manual page 3152

asieps_tobira_IM_US.book 23 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Step
1 CHECK SUBARU SELECT MONITOR DATA.
1) Select {Current Data Display & Save} in the
Subaru Select Monitor.
2) Read the condition of "ABS warning light".
2 CHECK WIRING HARNESS.
Measure the resistance between ABSCM con-
nector and combination meter connector.
Connector & terminal
(i10) No. 3 — (B301) No. 22:
3 CHECK POOR CONTACT OF CONNECTOR. Is there poor contact in ABSCM
Subaru Select Monitor
Check
Is "ON" displayed?
Is resistance less than 0.5 Ω?
connector and combination
meter connector?
ABS(diag)-23
ABS (DIAGNOSTICS)
Yes No
Replace the Go to step 2.
ABSCM only. <Ref.
to ABS-7,
REPLACEMENT,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
Go to step 3.
Repair harness
and connector
between
ABSCM&H/U and
combination meter.
Repair the connec- Check the combi-
tor. nation meter.