Subaru IMPREZA GD 2007 Series Manual page 3028

asieps_tobira_IM_US.book 123 ページ ２０１２年１月１７日 火曜日 午後３時４８分
D: ASSEMBLY
1) Attach the oil seal to the clutch housing, being
careful not to damage the seal.
ST 18657AA020 OIL SEAL INSTALLER
2) Install the clutch release bearing guide.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
E: INSPECTION
1) Check to make sure there are no damage or
cracks on the clutch housing. If there is excessive
damage, replace the clutch housing.
2) Inspect the clutch housing for gear oil leakage. If
any oil leaks are found, repair or replace the appli-
cable part.
Clutch Housing
ST
MT-01382
MT-01383
6MT-123
MANUAL TRANSMISSION AND DIFFERENTIAL