Subaru IMPREZA GD 2007 Series Manual page 3111

asieps_tobira_IM_US.book 4 ページ ２０１２年１月１７日 火曜日 午後３時４８分
ABS
2. ABS CONTROL MODULE AND HYDRAULIC CONTROL UNIT (ABSCM&H/U)
(1) ABS control module and hydraulic
control unit (ABSCM&H/U)
(2) Front outlet RH
(3) Rear outlet LH
(4) Rear outlet RH
(5) Front outlet LH
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the ground cable from
the battery.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
General Description
(3)
(2)
(6)
(10)
T2
(11)
(6) Primary inlet
(7) Secondary inlet
(8) Damper
(9) Spacer
(10) Damper
(11) Bracket
ABS-4
(5)
(4)
(7)
(1)
(9)
(8)
T1
T3
Tightening torque:N·m (kgf-m, ft-lb)
T1: 7.5 (0.76, 5.5)
T2: 33 (3.3, 24)
T3: 38 (3.8, 27.5)
ABS00799