Subaru IMPREZA GD 2007 Series Manual page 2871

asieps_tobira_IM_US.book 48 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
14.Reverse Check Sleeve
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 5MT-25, REMOVAL,
Manual Transmission Assembly.>
2) Remove the transfer case together with the ex-
tension case assembly. <Ref. to 5MT-39, REMOV-
AL, Transfer Case
Assembly.>
3) Remove the shifter arm.
4) Remove the plug, gasket, reverse accent spring,
and reverse check ball.
5) Remove the reverse check sleeve.
B: INSTALLATION
1) Install the reverse check sleeve.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Reverse Check Sleeve
and Extension Case
MT-00149
MT-00150
MT-00150
5MT-48
2) Install reverse check ball, reverse accent spring,
gasket and plug to the transfer case.
Tightening torque:
9.75 N·m (1.0 kgf-m, 7.2 ft-lb)
3) Attach the shifter arm to the transfer case as-
sembly.
4) Install the transfer case together with the exten-
sion case assembly. <Ref. to 5MT-39, INSTALLA-
TION, Transfer Case and Extension Case
Assembly.>
5) Install the manual transmission assembly to the
vehicle. <Ref. to 5MT-28, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
1) Cover the reverse check sleeve with a rag, and
remove the snap ring using a screwdriver.
NOTE:
Replace the snap ring with a new part if it is de-
formed or spring force is weakened.
(A)
(A) Snap ring
MT-00149
MT-00153