Subaru IMPREZA GD 2007 Series Manual page 2568

asieps_tobira_IM_US.book 61 ページ ２０１２年１月１７日 火曜日 午後３時４８分
10) Fill ATF from the oil charger pipe.
Recommended fluid:
<Ref. to 4AT-3, HYDRAULIC CONTROL AND
LUBRICATION, SPECIFICATION, General De-
scription.>
Capacity:
Fill with the same amount of fluid that was
drained from the drain plug hole.
11) Bleed the air of control valve body. <Ref. to
4AT-62, Air Bleeding of Control Valve.>
12) Check the ATF level. <Ref. to 4AT-28, Auto-
matic Transmission Fluid.>
13) Execute the learning control promotion. <Ref.
to 4AT(D)(diag)-16, FACILITATION OF LEARN-
ING CONTROL, OPERATION, Subaru Select
Monitor.>
C: INSPECTION
Check each part to make sure that there are no
holes, cuts, or attached dust.
Control Valve Body
4AT-61
AUTOMATIC TRANSMISSION