Subaru IMPREZA GD 2007 Series Manual page 3243

asieps_tobira_IM_US.book 34 ページ ２０１２年１月１７日 火曜日 午後３時４８分
BRAKE
7. Rear Disc Brake Assembly
A: REMOVAL
1. 14-INCH TYPE
CAUTION:
Do not allow brake fluid to come in contact with
vehicle body. If it does, wash off with water im-
mediately and wipe away completely.
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, and remove the wheels.
4) Disconnect the brake hose from caliper body as-
sembly.
5) Remove the bolt securing the lock pin to caliper
body.
6) Raise the caliper body, and then move it toward
vehicle center to separate it from the support.
7) Remove the support from housing.
NOTE:
Remove the support only when replacing the rotor
or support. It need not be removed when servicing
the caliper body assembly.
8) Remove mud and foreign matter from the caliper
body assembly and the support.
CAUTION:
Be careful not to allow foreign matter to enter
the brake hose connector.
2. 15-INCH TYPE
CAUTION:
Do not allow brake fluid to come in contact with
vehicle body. If it does, wash off with water im-
mediately and wipe away completely.
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, and remove the wheels.
4) Remove the pad from the caliper body. <Ref. to
BR-29, REMOVAL, Rear Brake Pad.>
5) Disconnect the brake hose from caliper body as-
sembly.
Rear Disc Brake Assembly
6) Remove the caliper body from the housing.
7) Remove mud and foreign objects from the cali-
per body assembly.
CAUTION:
Be careful not to allow foreign matter to enter
the brake hose connector.
3. 17-INCH TYPE
CAUTION:
Do not allow brake fluid to come in contact with
vehicle body. If it does, wash off with water im-
mediately and wipe away completely.
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, and remove the wheels.
BR-00247
4) Remove the brake pad from the caliper body.
<Ref. to BR-30, 17-INCH TYPE, REMOVAL, Rear
Brake Pad.>
5) Disconnect the brake hose from the caliper
body.
6) Remove the caliper body from the housing.
7) Remove mud and foreign objects from the cali-
per body.
CAUTION:
Be careful not to allow foreign matter to enter
the brake hose connector.
BR-34
BR-00315
BR-00315