Subaru IMPREZA GD 2007 Series Manual page 3296

asieps_tobira_IM_US.book 30 ページ ２０１２年１月１７日 火曜日 午後３時４８分
DIFFERENTIALS
4) Remove the bolts, and then remove the rear
cover.
NOTE:
Remove it by tapping with a plastic hammer.
(B)
(A) Rear cover
(B) Differential carrier
5) Keep the side bearing retainers separate to
make it possible to identify RH and LH sides. Re-
move the side bearing retainer attaching bolts, set
the ST to differential case, and extract the side
bearing retainers RH and LH with a puller.
NOTE:
Each shim, which is installed to adjusted the side
bearing preload, should be kept together with its
mating retainer.
ST 398457700 ATTACHMENT
ST
6) Pull out the differential case assembly from dif-
ferential carrier.
NOTE:
Be careful so that the teeth do not hit against the
case.
Rear Differential
7) When replacing the side bearing, remove the
bearing cup from the side bearing retainer using
ST.
ST 398527700
(A)
DI-00063
8) Remove the bearing cone with ST.
NOTE:
• Do not attempt to disassemble the parts unless
necessary.
• Set the puller so that its claws catch the edge of
the bearing cone.
• Never mix up the RH and LH bearing races and
cones.
ST 18759AA000 PULLER ASSY
9) Remove the hypoid driven gear by loosening hy-
poid driven gear bolts.
NOTE:
Do not disassemble the differential case.
DI-00064
DI-00065
DI-30
PULLER ASSY
ST
DI-00066
ST
DI-00316
DI-00068