Subaru IMPREZA GD 2007 Series Manual page 2784

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
D: INSPECTION
1. SHIFT LOCK OPERATION
Step
1 CHECK SHIFT LOCK.
1) Turn the ignition switch to ON.
2) Move the select lever to "P" range.
2 CHECK SHIFT LOCK.
3 CHECK STEERING LOCK.
AT Shift Lock Control System
Check
While brake pedal is not
depressed, can the select lever
move from "P" range to other
ranges?
While brake pedal is
depressed, can select lever
move from "P" range to other
ranges?
When the select lever is set to
except for "P" range, can the
ignition switch be turned to the
"LOCK" position?
CS-11
CONTROL SYSTEMS
Yes No
Go to step 2.
After inspecting
"POWER SUPPLY
AND GROUND
CIRCUIT FOR
BODY INTE-
GRATED UNIT",
inspect "SHIFT
LOCK OF
SELECT LEVER
DOES NOT
OPERATE". <Ref.
to CS-13, BODY
INTEGRATED
UNIT POWER
SUPPLY AND
GROUND CIR-
CUIT, INSPEC-
TION, AT Shift
Lock Control Sys-
tem.> <Ref. to CS-
17, SHIFT LOCK
OF SELECT
LEVER DOES
NOT OPERATE,
INSPECTION, AT
Shift Lock Control
System.>
Go to step 3. Inspect "SELECT
LEVER CANNOT
BE SHIFTED".
<Ref. to CS-15,
SELECT LEVER
CANNOT BE
SHIFTED,
INSPECTION, AT
Shift Lock Control
System.>
Inspect "STEER- Go to step 4.
ING LOCK DOES
NOT BE LOCKED
OR RELEASED".
<Ref. to CS-17,
SHIFT LOCK OF
SELECT LEVER
DOES NOT
OPERATE,
INSPECTION, AT
Shift Lock Control
System.>