Subaru IMPREZA GD 2007 Series Manual page 3145

asieps_tobira_IM_US.book 16 ページ ２０１２年１月１７日 火曜日 午後３時４８分
ABS (DIAGNOSTICS)
2. READ CURRENT DATA
1) Select {Each System Check} in the «Main Menu» screen.
2) Select {Brake Control} in the «Selection Menu» screen.
3) Select [YES] after the information of ABS type is displayed.
4) On the «Brake Control Diagnosis» display screen, select {Current Data Display/Save}.
5) Select {Data Display} in the «Data Display Menu» screen.
6) Using the scroll key, scroll the display screen up or down until necessary data is shown.
• A list of the support data is shown in the following table.
Display
FR Wheel Speed
FL Wheel Speed
RR Wheel Speed
RL Wheel Speed
Stop Light Switch
G Sensor Output Signal
Lateral G sensor Output Signal
Valve Relay Signal
ABS Warning Light
EBD Warning Light
Motor Relay Monitor
IG Power Supply Voltage
ABS Control Flag
ABS OK B Signal
NOTE:
For details concerning the operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION
MANUAL".
Subaru Select Monitor
Contents to be monitored
Wheel speed detected by front ABS wheel speed sensor RH is dis-
played.
Wheel speed detected by front ABS wheel speed sensor LH is dis-
played.
Wheel speed detected by rear ABS wheel speed sensor RH is dis-
played.
Wheel speed detected by rear ABS wheel speed sensor LH is dis-
played.
Stop light switch signal
Vehicle acceleration detected by analog G sensor is displayed.
Vehicle lateral acceleration detected by lateral G sensor is dis-
played. (STI model)
Valve relay operation signal is displayed.
ON operation of the ABS warning light is displayed.
ON operation of the EBD warning light is displayed.
Motor relay monitor voltage is displayed.
Voltage supplied to ABSCM&H/U is displayed.
ABS control condition is displayed.
ABS system normal/abnormal is displayed.
ABS(diag)-16
Unit of measure
km/h or MPH
km/h or MPH
km/h or MPH
km/h or MPH
ON or OFF
2
m/s (m/s )
2
m/s (m/s )
ON or OFF
ON or OFF
ON or OFF
V
V
ON or OFF
ON or OFF