Subaru IMPREZA GD 2007 Series Manual page 2555

asieps_tobira_IM_US.book 48 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AUTOMATIC TRANSMISSION
5) Disconnect the inhibitor switch connector.
(A)
(A) Inhibitor switch
6) Remove the inhibitor switch connector from the
stay.
7) Lift up the vehicle.
8) Remove the front and center exhaust pipes.
<Ref. to EX(H4SO)-4, REMOVAL, Front Exhaust
Pipe.> <Ref. to EX(H4DOTC)-10, REMOVAL,
Center Exhaust Pipe.>
9) Remove the snap pin and washer from the range
select lever.
(C) (D)
(A) Range select lever
(B) Snap pin
(C) Select cable
(D) Washer
10) Remove the plate assembly from the transmis-
sion case.
( A )
(A) Select cable
(B) Plate ASSY
Inhibitor Switch
AT-00033
(A)
(B)
AT-00034
( B )
AT-00035
4AT-48
11) Remove the bolt.
(A) Inhibitor switch
12) Move the range select lever to the parking po-
sition (left side).
(A)
(A) Range select lever
13) Remove the inhibitor switch from the transmis-
sion.
(A)
(A) Inhibitor switch
14) Disconnect the inhibitor switch harness con-
nector from the inhibitor switch.
(A)
AT-00036
AT-00037
AT-00038