Subaru IMPREZA GD 2007 Series Manual page 2620

asieps_tobira_IM_US.book 113 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Retaining plate
Part No.
31667AA420
31667AA320
31667AA330
31667AA340
31667AA350
31667AA360
31667AA370
31667AA380
NOTE:
If the drive plate is not being replaced, do not ad-
just.
18) Install the leaf spring of the low & reverse
brake.
(A) Leaf spring
19) Install the 2-4 brake piston and 2-4 brake re-
tainer by aligning the hole of the 2-4 brake retainer
with the hole on the transmission case.
(B)
(A) 2-4 brake piston
(B) 2-4 brake piston retainer
AT Main Case
Thickness mm (in)
3.8 (0.150)
4.1 (0.161)
4.4 (0.173)
4.7 (0.185)
5.0 (0.197)
5.3 (0.209)
5.6 (0.220)
5.9 (0.232)
(A)
AT-00293
(A)
AT-00287
4AT-113
AUTOMATIC TRANSMISSION
20) Install 2-4 brake piston return spring to the
transmission case.
21) Position the snap ring in the transmission. Us-
ing ST, press the snap ring into the specified loca-
tion.
ST 498677100 COMPRESSOR
S T
22) Install the planetary gear and low clutch as-
sembly to the transmission case.
CAUTION:
Install carefully while rotating the low clutch
and planetary gear assembly slowly, paying
special attention not to damage the seal ring.
AT-00286
AT-00289
AT-00255