Subaru IMPREZA GD 2007 Series Manual page 2575

asieps_tobira_IM_US.book 68 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AUTOMATIC TRANSMISSION
24.Oil Charge Pipe
A: REMOVAL
1) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H4SO)-6, REMOVAL, Air Intake
Chamber.>
2) Remove the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-13, REMOVAL, Intercooler.>
3) Remove the oil charge pipe, and then remove
the O-ring from the flange side.
(A)
(B)
(A) Oil level gauge
(B) Oil charge pipe
B: INSTALLATION
1) Install the oil charge pipe along with a new O-
ring.
Tightening torque:
41 N·m (4.2 kgf-m, 30.2 ft-lb)
(A)
(B)
(A) Oil level gauge
(B) Oil charge pipe
2) Install the air intake chamber. (Non-turbo model)
<Ref. to IN(H4SO)-6, INSTALLATION, Air Intake
Chamber.>
3) Install the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-14, INSTALLATION, Intercooler.>
C: INSPECTION
Make sure that the oil charge pipe is not deformed
or damaged.
Oil Charge Pipe
AT-02209
AT-02209
4AT-68