Subaru IMPREZA GD 2007 Series Manual page 2973

asieps_tobira_IM_US.book 68 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
20.Main Shaft Assembly
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
REMOVAL, Oil Pipe.> <Ref. to 6MT-43, REMOV-
AL, Neutral Position Switch.> <Ref. to 6MT-42, RE-
MOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
56, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-58,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-59, RE-
MOVAL, Oil Pump.>
8) Remove the transmission case. <Ref. to 6MT-
63, REMOVAL, Transmission Case.>
9) Remove the striking rod.
10) Use a screw driver to shift to the 4th gear posi-
tion.
(A)
(A) 3rd-4th shift rod
11) Remove the reverse idler holder.
(A)
(A) Reverse idler holder
Main Shaft Assembly
12) Remove the check plug, O-ring, check spring,
plunger and check ball from the adapter plate.
NOTE:
Do not reuse the O-ring.
(A)
(B)
(C)
(A) Check plug
(B) O-ring
(C) Checking spring
(D) Plunger
(E) Check ball
13) Remove the bolt and gasket holding the re-
verse idler shaft.
MT-00543
14) Push the main shaft assembly, driven gear as-
sembly, reverse idler gear and shifter forks to re-
move from the adapter plate all at once.
NOTE:
MT-00544
This work requires an assistant.
6MT-68
(B)
(C)
(E)
(D)
MT-00545
MT-00546
(A)