Subaru IMPREZA GD 2007 Series Manual page 3244

asieps_tobira_IM_US.book 35 ページ ２０１２年１月１７日 火曜日 午後３時４８分
B: INSTALLATION
1. 14-INCH TYPE
1) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the support.
2) Install the support to the housing.
Tightening torque:
53 N·m (5.4 kgf-m, 39.1 ft-lb)
3) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the contact surface between the
pad and pad clip.
4) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to the contact surface between the
pad and shim.
5) Install the pad to support.
6) Install the caliper body to the support.
Tightening torque:
37 N·m (3.8 kgf-m, 27.5 ft-lb)
7) Connect the brake hose using a new brake hose
gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
Rear Disc Brake Assembly
8) Bleed air from the brake system.
2. 15-INCH TYPE
1) Install the caliper body to the housing.
Tightening torque:
53 N·m (5.4 kgf-m, 39.1 ft-lb)
2) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00597
3) Install the pad to the caliper body.
4) Connect the brake hose using a new brake hose
gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
5) Bleed air from the brake system.
3. 17-INCH TYPE
1) Install the caliper body to the housing.
Tightening torque:
65 N·m (6.6 kgf-m, 47.9 ft-lb)
BR-00599
2) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00602
3) Install the pad to the caliper body.
4) Connect the brake hose using a new brake hose
gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
5) Bleed air from the brake system.
BR-35
BRAKE
BR-00605
BR-00606