Subaru IMPREZA GD 2007 Series Manual page 2802

asieps_tobira_IM_US.book 29 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7) Set a spanner wrench to adjusting nut B so that
it does not rotate, and then tighten the adjusting nut
A.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
( B )
(A) Adjusting nut A
(B) Adjusting nut B
8) After the completion of adjustment, confirm that
the select lever operates normally at all ranges.
9) Install in the reverse order of removal.
Select Cable
( A )
CS-00042
CS-29
CONTROL SYSTEMS