Subaru IMPREZA GD 2007 Series Manual page 3008

asieps_tobira_IM_US.book 103 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2) Remove the oil seal from the differential side retainer.
3) Remove the claw of ST1, and attach the claw of
ST2.
ST1 398527700 PULLER ASSY
ST2 18760AA000 CLAW
ST1
(A) CLAW
4) Remove the bearing outer race from the differ-
ential side retainer.
ST1 398527700 PULLER ASSY
ST2 18760AA000 CLAW
(A) Differential side retainer
Front Differential Assembly
D: ASSEMBLY
1. DIFFERENTIAL CASE
1) Use the ST to attach the new speedometer drive
gear and RH and LH bearing inner races to the dif-
ferential case.
ST1
ST2 398497701
CAUTION:
Do not apply pressure in excess of 20 kN (2.0
ton, 2.2 US ton, 2.0 Imp ton).
MT-01454
NOTE:
Always replace inner races and outer races as a
set.
(A)
2) Attach the hypoid driven gear to the differential
case.
ST2
Tightening torque:
MT-00668
2. DIFFERENTIAL SIDE RETAINER
1) Using the ST, install the oil seal.
ST 18675AA000 DIFFERENTIAL SIDE OIL
ST1
ST2
(A)
MT-00669
6MT-103
MANUAL TRANSMISSION AND DIFFERENTIAL
398437700 INSTALLER
SEAT
ST2
69 N·m (7.0 kgf-m, 50.9 ft-lb)
SEAL INSTALLER
ST
ST1
MT-00670
MT-00660
AT-00226