Subaru IMPREZA GD 2007 Series Manual page 3013

asieps_tobira_IM_US.book 108 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
26.Shifter Fork and Rod
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
REMOVAL, Oil Pipe.> <Ref. to 6MT-43, REMOV-
AL, Neutral Position Switch.> <Ref. to 6MT-42, RE-
MOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
56, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-58,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-59, RE-
MOVAL, Oil Pump.>
8) Remove the transmission case. <Ref. to 6MT-
63, REMOVAL, Transmission Case.>
9) Remove the individual gear assemblies. <Ref. to
6MT-68, REMOVAL, Main Shaft Assembly.>
B: INSTALLATION
1) Install the individual gear assemblies all at once.
<Ref. to 6MT-69, INSTALLATION, Main Shaft As-
sembly.>
2) Install the transmission case. <Ref. to 6MT-64,
INSTALLATION, Transmission Case.>
3) Install the oil pump. <Ref. to 6MT-61, INSTAL-
LATION, Oil Pump.>
4) Install the center differential. <Ref. to 6MT-58,
INSTALLATION, Center Differential.>
5) Install the transfer driven gear. <Ref. to 6MT-56,
INSTALLATION, Transfer Driven Gear.>
6) Install the extension case. <Ref. to 6MT-44, IN-
STALLATION, Extension Case.>
7) Install the oil pipe, neutral position switch, back-
up light switch and harness. <Ref. to 6MT-41, IN-
STALLATION, Oil Pipe.> <Ref. to 6MT-43, IN-
STALLATION, Neutral Position Switch.> <Ref. to
6MT-42, INSTALLATION, Back-up Light Switch.>
8) Install the manual transmission assembly to the
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
Shifter Fork and Rod
C: DISASSEMBLY
NOTE:
Discard the removed spring pin, and replace with a
new part.
1. REVERSE SHIFTER FORK
1) Remove the reverse fork using the ST.
ST 398791700
2) Remove the reverse shifter arm using the ST.
ST 398791700
2. 1ST-2ND, 3RD-4TH SHIFTER FORK
1) Using the ST, remove the 3rd-4th shifter fork.
ST 398791700
6MT-108
REMOVER
ST
MT-00680
REMOVER
ST
MT-00681
REMOVER
ST
MT-00682