Subaru IMPREZA GD 2007 Series Manual page 3319

asieps_tobira_IM_US.book 53 ページ ２０１２年１月１７日 火曜日 午後３時４８分
6. Rear Differential Side Oil Seal
A: INSPECTION
Make sure that there is no oil leakage from the side
oil seal.
If there is oil leakage, replace the oil seal.
B: REPLACEMENT
1) Shift the select lever or gear shift lever to neutral.
2) Release the parking brake.
3) Loosen the wheel nuts on both sides.
4) Lift up the vehicle.
5) Remove the wheels.
6) Remove the rear exhaust pipe and muffler.
• Non-turbo model<Ref. to EX(H4SO)-8, REMOV-
AL, Rear Exhaust Pipe.> <Ref. to EX(H4SO)-9,
REMOVAL, Muffler.>
• Turbo model and
EX(H4DOTC)-15, REMOVAL,
Pipe.> <Ref. to EX(H4DOTC)-17, REMOVAL, Muf-
fler.>
7) Remove the DOJ of rear drive shaft from rear dif-
ferential.
(1) Remove the ABS wheel speed sensor cable
clamp and the parking brake cable clamp from
bracket.
(A)
(A) ABS wheel speed sensor cable clamp
(B) Parking brake cable clamp
(2) Remove the ABS wheel speed sensor cable
clamp from the trailing link.
Rear Differential Side Oil Seal
STI model<Ref. to
Rear Exhaust
(B)
DI-00200
DI-00201
DI-53
(3) Remove the ABS wheel speed sensor cable
clamp and the parking brake cable guide from
the trailing link.
(A)
(B)
(A) Parking brake cable guide
(B) ABS wheel speed sensor cable clamp
(4) Remove the rear stabilizer link.
(5) Remove the bolts which secure the trailing
link to the housing.
(6) Remove the bolts which secure the front
and rear lateral links to the rear housing.
DIFFERENTIALS
DI-00202
RS-00163
DS-00342
DS-00343