Subaru IMPREZA GD 2007 Series Manual page 2892

asieps_tobira_IM_US.book 69 ページ ２０１２年１月１７日 火曜日 午後３時４８分
C: DISASSEMBLY
1. DIFFERENTIAL CASE ASSEMBLY
1) Loosen the twelve bolts and remove hypoid driv-
en gear.
(A)
(A) Hypoid driven gear
2) Drive out the straight pin from differential assem-
bly toward hypoid driven gear side.
ST 899904100 STRAIGHT PIN REMOVER
Front Differential Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL
3) Pull out the pinion shaft, and remove the differ-
ential bevel pinion, differential bevel gear and
washer.
4) Using the ST, remove the roller bearing.
ST 899524100
MT-00275
2. SIDE RETAINER
1) Remove the O-ring.
ST
MT-00276
5MT-69
(D)
(A)
(C)
(B)
(A) Pinion shaft
(B) Differential bevel pinion
(C) Differential bevel gear
(D) Washer
PULLER SET
ST
(B)
(C)
(D)
MT-00277
MT-00278
MT-00279