Subaru IMPREZA GD 2007 Series Manual page 2625

asieps_tobira_IM_US.book 118 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AUTOMATIC TRANSMISSION
3) Using the ST1 and ST2, remove the snap ring.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
(A)
(A) Snap ring
4) Take out the clutch cover, spring retainer, high
clutch piston and reverse clutch piston.
(A)
(A) Reverse clutch piston
(B) Cover
(C) Return spring
5) Remove the seal ring and lip seal from the high
clutch piston and reverse clutch piston.
(A)
(A) High clutch piston
(B) Reverse clutch piston
AT Main Case
2. PLANETARY GEAR AND LOW CLUTCH
1) Remove the snap ring from low clutch drum.
ST1
ST2
AT-00238
2) Take out the front planetary carrier.
(B)
(C)
AT-00239
3) Take out the rear sun gear.
(B)
AT-00240
4AT-118
(A)
(B)
(A) Snap ring
(B) Low clutch drum
(A)
(A) Front planetary carrier
(B) Low clutch drum
(A)
(B)
(A) Rear sun gear
(B) Rear planetary carrier
AT-00259
(B)
AT-00260
AT-00261