Subaru IMPREZA GD 2007 Series Manual page 3545

asieps_tobira_IM_US.book 2 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AIRBAG SYSTEM (DIAGNOSTICS)
1. Basic Diagnostic Procedure
A: PROCEDURE
Step
1 CHECK AIRBAG WARNING LIGHT.
Turn the ignition switch to ON.
2 READ DTC.
<Ref. to AB(diag)-34, Read Diagnostic Trouble
Code (DTC).>
3 PERFORM DIAGNOSIS.
1) Judge the possible cause from "List of Diag-
nostic Trouble Code". <Ref. to AB(diag)-43, List
of Diagnostic Trouble Code (DTC).>
2) Inspect the DTC using "List of Diagnostic
Trouble Code (DTC)".
3) Repair the trouble cause.
4) Perform the Clear Memory Mode. <Ref. to
AB(diag)-36, Clear Memory Mode.>
5) Perform the Inspection Mode. <Ref. to
AB(diag)-35, Inspection Mode.>
6) Read any other DTCs displayed.
Basic Diagnostic Procedure
Check
Does airbag warning light illu-
minate?
Is the normal code being
detected?
Is DTC being displayed?
AB(diag)-2
Yes No
Go to step 2. <Ref. to AB(diag)-
37, Airbag Warning
Light Failure.>Go
to "Airbag Warning
Light Failure".
Finish the diagno- Go to step 3.
sis.
Perform the proce- Finish the diagno-
dure 1) to 5) in step sis.
3.