Subaru IMPREZA GD 2007 Series Manual page 2966

asieps_tobira_IM_US.book 61 ページ ２０１２年１月１７日 火曜日 午後３時４８分
B: INSTALLATION
1) Apply oil to the outer rotor surface, and install to
the transmission case.
(B)
(A)
(A) Outer rotor
(B) Inner rotor
2) Attach the thrust washer to the main shaft.
3) Install the oil pump cover assembly.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
ST 18663AA000 SOCKET
4) Remove the oil pump shaft assembly and plate.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
ST 18663AA000 SOCKET
(B)
(A) Oil pump shaft ASSY
(B) Plate
Oil Pump
MANUAL TRANSMISSION AND DIFFERENTIAL
5) When replacing the oil pump cover assembly,
select the appropriate transfer driven gear and
thrust washer, and install to the extension case.
<Ref. to 6MT-46, ADJUSTMENT, Extension
Case.>
6) Install the selector arm No. 2 and the shifter arm.
(Transmission serial No. 144576 or earlier)
(A)
MT-00523
(A) Selector arm No. 2
(B) Shifter arm
7) Install the selector arm No. 2, shifter arm, selec-
tor plunger and spring. (Transmission serial No.
144577 or later)
(A)
MT-00522
(A)
(A) Selector arm No. 2
(B) Shifter arm
MT-00521
(C) Selector plunger
8) Install a new spring pin.
6MT-61
(B)
MT-01308
(B)
(C)
MT-02713