Subaru IMPREZA GD 2007 Series Manual page 2975

asieps_tobira_IM_US.book 70 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
6) Attach the reverse shifter fork assembly to the
reverse idler gear assembly.
(C)
(A) Reverse idler gear ASSY
(B) Reverse shifter fork
(C) Reverse sleeve
7) Install the reverse idler gear assembly.
(B)
(A) Reverse idler gear ASSY
(B) 1st drive gear
(C) Reverse gear
8) Install the thrust bearing of the driven gear as-
sembly.
9) Push on the shifter forks, main shaft assembly,
driven gear assembly and reverse idler gear as-
semblies, to attach to the adapter plate all at once.
NOTE:
This work requires an assistant.
Main Shaft Assembly
(B)
(A)
MT-00551
(A)
(C)
MT-00552
6MT-70
10) Install the plunger, check spring, new O-ring
and check plugs.
Tightening torque:
25 N·m (2.5 kgf-m, 18.4 ft-lb)
(A)
(B)
(C)
(D)
(A) Check plug
(B) O-ring
(C) Checking spring
(D) Plunger
MT-00553