Subaru IMPREZA GD 2007 Series Manual page 3381

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
ADJUSTMENT
1) Loosen the self-locking nut on the inner side of
link rear.
NOTE:
When loosening or tightening the adjusting bolt,
hold the bolt head and turn the self-locking nut.
(1) Adjusting bolt
(2) Link rear
Rotate the left side clockwise.
Rotate the left side counterclockwise.
3) Attach and tighten a new self-locking nut.
Tightening torque:
100 N·m (10.2 kgf-m, 74 ft-lb)
Wheel Alignment
(1)
(2)
FS-00017
To increase toe-in:
FS-00018
To decrease toe-in:
FS-00019
FS-11
2) Turn the adjusting bolt until toe-in is at adjust-
ment standard.
Toe-in:
± ±
0 2 mm (0 0.08 in) (adjustment standard)
NOTE:
When the left and right wheels are adjusted for toe-
in at the same time, the movement of one scale
graduation changes toe-in by approx. 1.5 mm (0.6
in).
Rotate the right side counterclockwise.
Rotate the right side clockwise.
FRONT SUSPENSION
FS-00019
FS-00018