Subaru IMPREZA GD 2007 Series Manual page 2627

asieps_tobira_IM_US.book 120 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AUTOMATIC TRANSMISSION
12) Remove the needle bearing after taking out the
snap ring.
(A)
(A) Needle bearing
(B) Snap ring
3. 2-4 BRAKE
1) Separate the 2-4 brake piston and piston retain-
er.
( A )
(A) 2-4 brake piston
(B) 2-4 brake piston retainer
2) Remove the D-ring from the 2-4 brake piston.
4. ONE-WAY CLUTCH INNER RACE
1) Remove the seal ring.
(B)
(A) One-way clutch inner race
(B) Seal ring
2) Remove the needle bearing using ST.
ST 398527700 PULLER ASSY
AT Main Case
5. ONE-WAY CLUTCH OUTER RACE
1) Remove the one-way clutch after taking out the
snap ring.
(B)
AT-00268
2) Remove the needle bearing after taking out the
snap ring.
( B )
AT-00288
D: ASSEMBLY
1. HIGH CLUTCH AND REVERSE CLUTCH
1) Install the seal ring and lip seal to the high clutch
piston and reverse clutch piston.
(A)
2) Install the high clutch piston to the reverse clutch
piston.
AT-00298
4AT-120
(C)
(A)
(B)
(A) Snap ring
(B) Plate
(C) One-way clutch
(A)
(A) Needle bearing
(B) Snap ring
(A)
(B)
(A) High clutch piston
(B) Reverse clutch piston
AT-00267
(B)
AT-00268
AT-00240