Subaru IMPREZA GD 2007 Series Manual page 2799

asieps_tobira_IM_US.book 26 ページ ２０１２年１月１７日 火曜日 午後３時４８分
CONTROL SYSTEMS
16) Remove the bracket from the select lever as-
sembly.
17) Remove the bushing from the bracket.
D: ASSEMBLY
1) Clean all the parts before assembly.
2) Apply grease to each part of select lever. <Ref.
to CS-2, AT SELECT LEVER, COMPONENT,
General Description.>
Lock plate:
SUNCALL GREASE (Part No. 002948040)
Except for lock plate:
KOPR-KOTE (Part No. 003603001) or equiva-
lent
3) Assemble in the reverse order of disassembly.
4) After completing installation, shift the select le-
ver from "P" range to "1" range, then check whether
the select indicator and select lever matches,
whether the pointer and position mark matches,
and check the operating force.
E: INSPECTION
1) Check the removed parts for deformation, dam-
age and wear. Repair or replace if defective.
2) Confirm the select lever ASSY operating condi-
tion before assembling. Normal if it operates
smoothly.
Select Lever
CS-00112
CS-00113
CS-26