Subaru IMPREZA GD 2007 Series Manual page 2903

asieps_tobira_IM_US.book 80 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
4) Inspect the clearance between the 3rd, 4th drive
gear and the coupling sleeve. If any clearance is
not within specifications, replace the shifter fork as
required.
Clearance (a) and (b):
9.3 mm (0.366 in)
(a)
(A)
(A) 3rd drive gear
(B) Coupling sleeve
(C) 4th drive gear
3rd-4th shifter fork
Part No. Mark
32810AA061 1
32810AA071 No mark
32810AA101 3
5) Inspect the clearance between 5th drive gear
and coupling sleeve. If any clearance is not within
specifications, replace the shifter fork as required.
Clearance (a):
9.3 mm (0.366 in)
(A) (a)
(A) 5th drive gear
(B) Coupling sleeve
Shifter Fork and Rod
(b)
(B)
(C)
MT-00940
Remarks
Approaches 4th gear
by 0.2 mm (0.008 in).
Standard
Moves away from 3rd
gear by 0.2 mm
(0.008 in).
(B)
MT-01512
5MT-80
5th shifter fork (Non-turbo model), Identification paint (pink)
Part No. Mark
32812AA201 7
32812AA211 No mark
32812AA221 9
5th shifter fork (Turbo model), Identification paint (blue)
Part No. Mark
32812AA231 7
32812AA241 No mark
32812AA251 9
6) Inspect the rod end clearances (A) and (B). If
any clearance is not within specifications, replace
the rod or fork as required.
Clearance (A):
3rd-4th — 5th:
0.5 — 1.3 mm (0.020 — 0.051 in)
Clearance (B):
1st-2nd — 3rd-4th:
0.4 — 1.4 mm (0.016 — 0.055 in)
Remarks
Approaches 5th gear
by 0.2 mm (0.008 in).
Standard
Moves away from 5th
gear by 0.2 mm
(0.008 in).
Remarks
Approaches 5th gear
by 0.2 mm (0.008 in).
Standard
Moves away from 5th
gear by 0.2 mm
(0.008 in).
MT-00316