asieps_tobira_IM_US.book 24 ページ 2012年1月17日 火曜日 午後3時48分
DIFFERENTIALS
(4) Remove the rear stabilizer link.
(5) Remove the bolts which secure the trailing
link to the housing.
(6) Remove the bolts which secure the front
and rear lateral links to the rear housing.
Rear Differential
(7) Remove the DOJ from the rear differential
by using ST.
NOTE:
When removing the DOJ from the rear differential,
fit the ST to the bolts as shown in the figure so as
not to damage the side bearing retainer.
ST 208099PA100 DRIVE SHAFT REMOVER
RS-00163
DS-00342
(A) Bolt
14) Suspend the rear drive shaft to the rear cross-
member using wire.
DS-00343
DI-24
ST
(A)
DI-00491
DI-00053