Subaru IMPREZA GD 2007 Series Manual page 2594

asieps_tobira_IM_US.book 87 ページ ２０１２年１月１７日 火曜日 午後３時４８分
33.Parking Pawl
A: REMOVAL
1) Remove the transmission assembly from vehicle
body. <Ref. to 4AT-37, REMOVAL, Automatic
Transmission Assembly.>
2) Remove the rear wheel speed sensor, and sep-
arate the extension case from transmission case.
<Ref. to 4AT-70, REMOVAL, Extension Case.>
3) Remove the reduction drive gear. (MP-T model)
<Ref. to 4AT-83, REMOVAL, Reduction Drive
Gear.>
4) Remove the center differential carrier. (VTD
model) <Ref. to 4AT-85, REMOVAL, Center Differ-
ential Carrier.>
5) Remove the parking pawl, return spring and
shaft.
(A)
(A) Return spring
(B) Parking pawl
Parking Pawl
B: INSTALLATION
1) Install the parking pawl, return spring and shaft.
2) Install the reduction drive gear. (MP-T model)
<Ref. to 4AT-83, INSTALLATION, Reduction Drive
Gear.>
(B)
3) Install the center differential carrier. (VTD model)
<Ref. to 4AT-85, INSTALLATION, Center Differen-
tial Carrier.>
4) Install the rear vehicle speed sensor and exten-
sion case. <Ref. to 4AT-70, INSTALLATION, Ex-
tension Case.>
5) Install the transmission assembly to the vehicle.
<Ref. to 4AT-39, INSTALLATION, Automatic
AT-02214
Transmission Assembly.>
C: INSPECTION
Check the tab of the parking pole on the reduction
gear for wear or other damage.
4AT-87
AUTOMATIC TRANSMISSION
(B)
(A)
(A) Return spring
(B) Parking pawl
AT-02214