Subaru IMPREZA GD 2007 Series Manual page 3289

asieps_tobira_IM_US.book 23 ページ ２０１２年１月１７日 火曜日 午後３時４８分
4. Rear Differential
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Shift the select lever or gear shift lever to neutral.
4) Release the parking brake.
5) Loosen the wheel nuts.
6) Lift up the vehicle.
7) Remove the wheels.
8) Disconnect the connector from the oil tempera-
ture switch. (STI model)
(A) Connector
9) Remove the rear exhaust pipe and muffler.
SOHC model<Ref. to EX(H4SO)-8, REMOVAL,
Rear Exhaust Pipe.> <Ref. to EX(H4SO)-9, RE-
MOVAL, Muffler.>
DOHC turbo model<Ref. to EX(H4DOTC)-15, RE-
MOVAL, Rear Exhaust
EX(H4DOTC)-17, REMOVAL, Muffler.>
10) Remove the front cover of the rear differential
mount.
11) Remove the propeller shaft. <Ref. to DS-15,
REMOVAL, Propeller Shaft.>
12) Remove the rear differential protector. (If
equipped)
13) Remove the DOJ of rear drive shaft from rear
differential.
Rear Differential
(A)
DI-00348
Pipe.> <Ref. to
DI-00050
DI-23
(1) Remove the ABS wheel speed sensor cable
clamp and the parking brake cable clamp from
bracket.
(A)
(B)
(A) ABS wheel speed sensor cable clamp
(B) Parking brake cable clamp
(2) Remove the ABS wheel speed sensor cable
clamp from the trailing link.
(3) Remove the ABS wheel speed sensor cable
clamp and the parking brake cable guide from
the trailing link.
(A)
(B)
(A) Parking brake cable guide
(B) ABS wheel speed sensor cable clamp
DIFFERENTIALS
DI-00200
DI-00201
DI-00202