asieps_tobira_IM_US.book 45 ページ 2012年1月17日 火曜日 午後3時48分
C: DISASSEMBLY
1) Remove the transfer drive gear. <Ref. to 6MT-
54, REMOVAL, Transfer Drive Gear.>
2) Remove the extension guide.
3) Remove the shift bracket.
4) Remove the bearing cone using the ST.
ST 18758AA000 PULLER
(A) Bearing cone
5) Remove the thrust washer and oil plate.
(B)
(A)
(A) Thrust washer
(B) Oil plate
Extension Case
MANUAL TRANSMISSION AND DIFFERENTIAL
6) Remove the shifter arm oil seal.
(A) Oil seal
7) Remove the reverse check system. <Ref. to
MT-00477
6MT-51, REMOVAL, Reverse Check System.>
8) Remove the extension oil seal. <Ref. to 6MT-29,
REPLACEMENT, Oil Seal.>
D: ASSEMBLY
1) Install the reverse check system. <Ref. to 6MT-
52, INSTALLATION, Reverse Check System.>
2) Install the extension case oil seal. <Ref. to 6MT-
29, REPLACEMENT, Oil Seal.>
3) Install a shifter arm oil seal using the ST.
ST1 18657AA000 INSTALLER
ST2 18671AA000 OIL SEAL GUIDE
MT-00478
(A)
ST
(A) Oil seal
MT-00479
4) Install the oil plate.
5) Select the thrust washer of the bearing, and at-
tach to the extension case. <Ref. to 6MT-46, AD-
MT-01418
JUSTMENT, Extension Case.>
6MT-45
(A)
MT-00481
ST1
(A)
ST2
MT-00482
MT-01419