Subaru IMPREZA GD 2007 Series Manual page 2869

asieps_tobira_IM_US.book 46 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
C: DISASSEMBLY
1) Using the ST, remove the roller bearing (exten-
sion case side).
ST 498077000 REMOVER
(A)
(A) Roller bearing
2) Using ST1 and ST2, remove the roller bearing
(transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
(A)
(A) Roller bearing
D: ASSEMBLY
1) Using the ST, install the roller bearing (extension
case side).
ST1 398177700 INSTALLER
ST2 899864100 REMOVER
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A)
(A) Roller bearing
Transfer Driven Gear
2) Using ST, install the roller bearing (transfer case
side).
ST 499757002
CAUTION:
Do not apply a load in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
ST
MT-00143
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
ST2
• When the bearings fail to turn smoothly or emit
noise in rotation after gear oil lubrication.
2) Driven gear
ST1
If the driven gear tooth surface and shaft are exces-
sively broken or damaged, replace the driven gear.
MT-00144
ST2
ST1
MT-00145
5MT-46
INSTALLER
ST
(A)
(A) Roller bearing
MT-00146