Subaru IMPREZA GD 2007 Series Manual page 3527

asieps_tobira_IM_US.book 4 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AIRBAG SYSTEM
• Do not drop the airbag system parts, or keep
them at high temperature of 93°C (199°F) or more,
or let water, oil or grease get on them; the internal
parts may be damaged and reliability greatly low-
ered.
NG NG N N N N N N N N G
• If damage, open circuit or rust is found on airbag
system wiring harness, do not use a soldering
equipment to repair. Replace the faulty harness
with a new genuine part.
N N N N N N G G G G N N N N N N N N N N N N G G NG G NG
• Install the wiring harness securely with the spec-
ified clips to avoid interference or tangled with other
parts.
General Description
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
AB-01538
G G G G G G G G G G G G G G G G G G G G
AB-01539
AB-00125
AB-4
• Do not allow water or oil to come in contact with
the connector terminals. Also, do not touch the con-
nector terminals.
N N N NG N N N N N N N N N N N N N N N G NG N N N N G G G G G N N N G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
• Either of the airbag modules for driver's, passen-
ger's and side or the pretensioner must not be dis-
assembled.
NG NG NG G G G NG NG G G G G G G G G G N N N N N N N N G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G NG G G NG NG N N N N N N N N N N N N G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
• The removed front seat with airbag module must
be kept at least 200 mm (8 in) away from walls and
other objects.
(1)
(1) 200 mm (8 in) or more
• Do not use the airbag or pretensioner parts from
other vehicles. Always replace the defective parts
with new parts.
• Never reuse a deployed airbag and pretension-
er.
• When painting or performing sheet metal work
on the front part of the vehicle, including the front
wheel apron, front fender and front side frame, re-
move the front sub sensors and wiring harness of
airbag system.
AB-01540
AB-01541
AB-00128