asieps_tobira_IM_US.book 67 ページ 2012年1月17日 火曜日 午後3時48分
5) Install the ball, valve spring and a new O-ring.
Tightening torque:
T1: 13 N·m (1.3 kgf-m, 9.6 ft-lb)
T2: 16 N·m (1.6 kgf-m, 11.8 ft-lb)
(A)
(B)
(C)
(A) O-ring
(B) Relief valve spring
(C) Relief valve
(D) Valve spring
(E) Ball
(F) Harness bracket
E: INSPECTION
1) If there is sludge on the oil pan magnet, use a
waste cloth to wipe it off completely.
2) Inspect that the oil strainer is not clogged. If it is
clogged, clean or replace the oil strainer.
3) Check that there is no damage on each part. Re-
place damaged parts with new parts.
Transmission Case
T1
T1
(A)
(D)
(E)
(F)
T2
MT-00542
6MT-67
MANUAL TRANSMISSION AND DIFFERENTIAL