Subaru IMPREZA GD 2007 Series Manual page 3530

asieps_tobira_IM_US.book 7 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2. Airbag Connector
A: PROCEDURE
1. POWER SUPPLY
1) How to disconnect:
(1) With the lock arm (A) pushed in, pull the
connector in the direction of arrow.
CAUTION:
When pulling the lock arm or disconnecting
connector, be sure to hold the connector, not
the harness.
2) How to connect:
Holding the connector (A), and push it in carefully
until a clicking sound is heard.
(A)
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
Airbag Connector
(A)
AB-01518
AB-01519
AB-7
2. DRIVER'S AIRBAG MODULE AND PRE-
TENSIONER
1) How to disconnect
(1) Using a flat tip screwdriver, pry the push
lock upward to unlock.
(2) Pull the connector to disconnect from the
driver's airbag module assembly or the retractor
assembly.
2) How to connect
Connect the connector in the reverse order of dis-
connecting. At this time, be sure to insert the push
lock until a clicking sound is heard.
CAUTION:
• Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
• Be sure to push the push lock in securely.
AIRBAG SYSTEM
AB-00478
AB-00479
AB-00480