Subaru IMPREZA GD 2007 Series Manual page 2952

asieps_tobira_IM_US.book 47 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7) Using an ST, remove the neutral set spring and
support.
ST1 18756AA000 CLAW
ST2 399893600 PLIER
ST2 ST2
8) Lift the striking rod, and remove the spring pin.
(B)
(A) Striking rod
(B) Spring pin
9) Remove the selector arm No. 2 and the shifter
arm. (Transmission serial No. 144576 or earlier)
(A)
(A) Selector arm No. 2
(B) Shifter arm
Extension Case
ST1
MT-01092
(A)
MT-01307
(B)
MT-01308
6MT-47
MANUAL TRANSMISSION AND DIFFERENTIAL
10) Remove the selector arm No. 2, shifter arm, se-
lector plunger and spring. (Transmission serial No.
144577 or later)
(A)
(C)
(A) Selector arm No. 2
(B) Shifter arm
(C) Selector plunger
11) Attach the bearing cone to the transfer driven
gear.
12) Set the ST.
ST 18831AA000 GAUGE
13) Turn the transfer driven gear 10 or more times
to seat the bearing properly.
(B)
MT-02713
ST
MT-00489