Subaru IMPREZA GD 2007 Series Manual page 3012

asieps_tobira_IM_US.book 107 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3) Install the speedometer driven gear and snap
ring.
(B)
(A)
(A) Snap ring
(B) Speedometer driven gear
4) Install the vehicle speed sensor. <Ref. to 6MT-
31, INSTALLATION, Vehicle Speed Sensor.>
5) Install the front differential assembly. <Ref. to
6MT-100, INSTALLATION, Front Differential As-
sembly.>
6) Install the drive pinion shaft assembly. <Ref. to
6MT-94, INSTALLATION, Drive Pinion Shaft As-
sembly.>
7) Install the individual gear assemblies all at once.
<Ref. to 6MT-69, INSTALLATION, Main Shaft As-
sembly.>
8) Install the transmission case. <Ref. to 6MT-64,
INSTALLATION, Transmission Case.>
9) Install the oil pump. <Ref. to 6MT-61, INSTAL-
LATION, Oil Pump.>
10) Install the center differential. <Ref. to 6MT-58,
INSTALLATION, Center Differential.>
11) Install the transfer driven gear. <Ref. to 6MT-
56, INSTALLATION, Transfer Driven Gear.>
12) Install the extension case. <Ref. to 6MT-44, IN-
STALLATION, Extension Case.>
13) Install the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
INSTALLATION, Oil Pipe.> <Ref. to 6MT-43, IN-
STALLATION, Neutral Position Switch.> <Ref. to
6MT-42, INSTALLATION, Back-up Light Switch.>
14) Install the manual transmission assembly to the
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
Speedometer Gear
MANUAL TRANSMISSION AND DIFFERENTIAL
MT-00676
6MT-107