Subaru IMPREZA GD 2007 Series Manual page 2578

asieps_tobira_IM_US.book 71 ページ ２０１２年１月１７日 火曜日 午後３時４８分
C: DISASSEMBLY
1. MP-T MODEL
1) Take out the transfer clutch by lightly tapping the
end of the rear drive shaft.
NOTE:
Be careful not to damage the oil seal of the exten-
sion.
(B)
(A) Transfer clutch
(B) Extension case
2) Remove the transfer clutch pipe while being
careful not to deform the pipe.
(A) Extension case
(B) Transfer clutch pipe
3) Remove the dust cover from extension case.
4) Remove the oil seal from the extension case.
Extension Case
2. VTD MODEL
1) Using the ST1, ST2, ST3, and a press, remove
the snap ring.
ST1 398673600
ST2 498627100
ST3 398663600
(A)
2) Remove the test plug.
AT-00119
(A)
(B)
3) Remove the clutch piston by applying com-
pressed air.
AT-00120
4AT-71
AUTOMATIC TRANSMISSION
COMPRESSOR
SEAT
PLIER
ST3
(A)
(B)
(A) Test plug
(B) Extension case
ST1
ST2
AT-00121
AT-00122
AT-00123