Subaru IMPREZA GD 2007 Series Manual page 3543

asieps_tobira_IM_US.book 20 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AIRBAG SYSTEM
10.Front Sub Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the front bumper. <Ref. to EI-24, RE-
MOVAL, Front Bumper.>
4) Remove the bolt, and then detach the front sub
sensor.
5) Disconnect the connector from front sub sensor.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to AB-2, SRS AIRBAG, COMPO-
NENT, General Description.>
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
• Front sub sensor and connector are damaged.
• Airbag is deployed.
Front Sub Sensor
AB-01398
AB-20