Subaru IMPREZA GD 2007 Series Manual page 3056

asieps_tobira_IM_US.book 21 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Read Diagnostic Trouble Code (DTC)
MANUAL TRANSMISSION AND DIFFERENTIAL (DIAGNOSTICS)
7. Read Diagnostic Trouble
Code (DTC)
A: OPERATION
1. WHEN USING THE DIAGNOSIS
INDICATOR LIGHT
NOTE:
Perform steps 4) to 8) below within 30 seconds.
1) Securely apply the parking brake.
2) Switch the center differential control dial in the
differential free position.
3) Start the engine.
4) Switch the center differential control dial in the
differential lock position.
5) Release the parking brake.
6) Switch the center differential control dial in the
differential free position.
7) Securely apply the parking brake.
8) Repeat steps 4) to 7) two more times.
NOTE:
If the diagnosis indicator light does not flash, repeat
from step 1).
9) Perform the Inspection Mode. <Ref. to 6MT(di-
ag)-23, Inspection Mode.>
NOTE:
Refer to "How to Read Diagnostic Trouble Code"
for information on how to read a DTC. <Ref. to
6MT(diag)-22, HOW TO READ DIAGNOSTIC
TROUBLE CODE (DTC), OPERATION, Read Di-
agnostic Trouble Code (DTC).>
2. WITH SUBARU SELECT MONITOR
For details regarding DTC read procedures, refer to
the "Subaru Select Monitor". <Ref. to 6MT(diag)-
15, Subaru Select Monitor.>
6MT(diag)-21