Subaru IMPREZA GD 2007 Series Manual page 3228

asieps_tobira_IM_US.book 19 ページ ２０１２年１月１７日 火曜日 午後３時４８分
B: INSTALLATION
1. 15-INCH TYPE
1) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the support.
2) Apply a thin coat of Molykote M7439 (Part No.
003602001) to the contact surface between the
pad and pad clip.
3) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim.
4) Install the pad to support.
5) Install the caliper body to the support.
Tightening torque:
26.5 N·m (2.7 kgf-m, 19.5 ft-lb)
NOTE:
If it is difficult to push the piston during pad replace-
ment, loosen the air bleeder screws to facilitate
work.
Front Brake Pad
2. 16-INCH TYPE
1) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00597
2) Install the pad to the caliper body.
3) Install the pad pin to the caliper body.
4) Attach the M clip.
5) Attach the cross spring.
3. 17-INCH TYPE
1) Apply a thin coat of Molykote AS-880N (Part No.
K0777YA010) to both surfaces of the pad inner
shim, and Molykote M7439 (Part No. 003602001)
to the sides of pad.
BR-00596
2) Install the pad to the caliper body.
3) Attach the cross spring.
4) Attach the pad pin.
5) Install the clip.
BR-00601
BR-19
BRAKE
BR-00603
BR-00604