Subaru IMPREZA GD 2007 Series Manual page 2884

asieps_tobira_IM_US.book 61 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3) Remove the roller bearing and washer using ST
and a press.
NOTE:
Do not reuse the roller bearing.
ST 498077000 REMOVER
4) Flatten the nut tab. Remove the lock nut using
ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
ST2
ST1
5) Remove the 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOVER
6) Remove the woodruff key.
Drive Pinion Shaft Assembly
7) Remove the roller bearing, and 3rd-4th driven
gear using ST1 and ST2.
ST1
ST2 899714110
ST
8) Remove the key.
MT-00246
9) Remove the 2nd driven gear, inner baulk ring,
synchro cone and outer baulk ring.
MT-00247
10) Remove the 1st driven gear, inner baulk ring,
synchro cone, outer baulk ring, 2nd gear bushing,
gear & hub using ST1 and ST2.
S T
MT-00248
5MT-61
MANUAL TRANSMISSION AND DIFFERENTIAL
499757002 INSTALLER
REMOVER
(D)
(B) (C)
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
(A)
(D)
(C)
(B)
(A) 1st driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
ST1
ST2
MT-00249
(A)
MT-01329
MT-00992