Subaru IMPREZA GD 2007 Series Manual page 2949

asieps_tobira_IM_US.book 44 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
13.Extension Case
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the extension case.
4) Remove any remaining liquid gasket from the
extension case and transmission case.
B: INSTALLATION
1) Select the thrust washer of the transfer driven
gear, and attach to the extension case. <Ref. to
6MT-46, ADJUSTMENT, Extension Case.>
2) Apply a thin coat of oil to the outer surface of the
bearing cone, and attach to the extension case.
3) Select the thrust washer of the transfer drive
gear, and attach to the center differential.
4) Apply liquid gasket to the transmission case.
Liquid gasket:
THREE BOND 1215 (Part No. 004403007)
Extension Case
5) Install the extension case.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
NOTE:
Insert the stopper section of the center differential
between the extension guides.
MT-00475
(A) Extension guide
(B) Stopper
(C) Center differential
(D) Extension case
MT-00476
6) Install the manual transmission assembly to the
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
6MT-44
MT-00475
(B)
(C)
(A)
(D)
MT-00973