Subaru IMPREZA GD 2007 Series Manual page 3541

asieps_tobira_IM_US.book 18 ページ ２０１２年１月１７日 火曜日 午後３時４８分
AIRBAG SYSTEM
8. Side Airbag Sensor
A: REMOVAL
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery and
wait for at least 20 seconds before starting work.
3) Remove the front outer seat belt. <Ref. to SB-10,
OUTER SEAT BELT ASSEMBLY, REMOVAL,
Front Seat Belt.>
4) Detach the side airbag sensor, and then discon-
nect the airbag connector.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to AB-2, SRS AIRBAG, COMPO-
NENT, General Description.>
C: INSPECTION
Check for the following, and replace the damaged
parts with new parts.
• Mounting bracket or connector of side airbag
sensor is damaged.
• Side airbag is deployed.
Side Airbag Sensor
AB-00421
AB-18