Subaru IMPREZA GD 2007 Series Manual page 3434

asieps_tobira_IM_US.book 28 ページ ２０１２年１月１７日 火曜日 午後３時４８分
POWER ASSISTED SYSTEM (POWER STEERING)
3) Using the ST, loosen the lock nut.
ST 926230000 SPANNER
4) Tighten the adjusting screw until it can no longer
be tightened.
5) Loosen the adjusting screw, and remove the
spring and sleeve.
6) Remove the two bolts securing valve assembly.
7) Carefully draw out the input shaft and remove
the valve assembly.
Steering Gearbox
8) Slide the dust cover out.
ST
PS-00139
9) Using a press, remove the pinion & valve as-
sembly from valve housing.
PS-00140
10) Using the ST and a press, remove the dust
seal, oil seal and special bearing from the valve
housing.
ST 34099FA120 INSTALLER & REMOVER
CAUTION:
• Do not apply a force to the end surface of
PS-00116
valve housing.
• Do not reuse the oil seal after removal.
PS-00143
PS-28
(1)
(1) Dust cover
(1)
(2)
(3)
(1) Valve ASSY
(2) Valve housing
(3) Cloth
SEAL
ST
(1)
(2)
(1) Oil seal
(2) Special bearing
PS-00144
PS-00149
PS-00150